Strong in large paving widths
The versatile fixed screeds from ABG have proved their effectiveness across a host of paving projects all over the world. Benefitting from an expansive paving width of 2.5 m to 13 m, they are designed to lay everything from hot asphalt to Roller-Compacted Concrete and Cement-Bound Materials, all the way to railway ballast and graded mineral mixes. For added convenience and fast start-up, these screeds come electrically heated.
MB 122 ETC Screed
Single tamper fixed screed with a paving width of 2.5-13 m. The variable amplitude selection enables the operator to preselect the tamper amplitude according to the paving material and site conditions. The vibration system does not only obtain additional compaction, but also improves the surface texture, particularly when laying wearing courses.
Available for: ABG 8820, ABG 8820L, ABG 7820, ABG 7820L, ABG 6820, ABG 6820L, ABG 6720L
MB 122 ETC Vario Screed
Single tamper fixed screed with variable extensions and paving width of 2.5-12 m. Two variable extensions of 0.75 m on each side, positioned to the right and left screed ends, extend and retract to adapt to irregular edges.
Available for: ABG 8820, ABG 8820L, ABG 7820, ABG 7820L
VDT 121 ETC Screed
Double tamper fixed screed with a paving width of 2.5-13 m. The best partners for paving thick layers, ABG screeds with dual tamper bar offer higher pre-compaction to optimize the cost-effectiveness of your projects. The double tamper technology delivers a 5-7% higher degree of compaction and can achieve up to 98% Marshall density. It also provides the best possible even surface due to the feeding effect of the first tamper.
Available for: ABG 8820, ABG 8820L, ABG 7820, ABG 7820L
VDT 121 ETC Vario Screed
Double tamper fixed screed with variable extensions and paving width of 2.5-12 m. The best partners for paving thick layers, Ammann ABG screeds with dual tamper bar offer higher pre-compaction to optimize the cost-effectiveness of your projects. The double tamper technology delivers a 5-7% higher degree of compaction and can achieve up to 98% Marshall density. It also provides the best possible even surface due to the feeding effect of the first tamper. Two variable extensions of 0.75m on each side, positioned to the right and left screed ends, extend and retract to adapt to irregular edges.
Available for: ABG 8820, ABG 8820L, ABG 7820, ABG 7820L
Key features
- Variable tamper and vibration speed
- Dual tamper bar variant for higher pre-compaction of thick layers
- Crown adjustment + 4% /- 2%
- Quick startup: from 20°C to 120°C in just 40 min
- Precise electric thermo-controlled heating with automatic temperature adjustment
- Central lifting eyes per section
- Hose and cable routing channel
- On-board diagnostic function for heating bars
- Tamper bars within reach and fully hardened